Simpson ABU44RZ Rough Cut 4x4 Adjustable Post Base - Zmax Finish – Fasteners Plus

€ 13.00 · 4.6 (391) · Auf Lager

Notice - This connector is designed for Rough Cut lumber NOT nominal lumber (most common). This will only fit a post that measures an actual 4x4". If you have a nominal post measuring 3-1/2x3-1/2" you will need an ABU44Z Post base The Strong-Tie ABU series of adjustable post bases provide a 1" standoff for the post and

The Strong-Tie ABU series of adjustable post bases provide a 1 standoff for the post and are slotted for adjustability. The R series of post bases are designed exclusively for use with rough cut lumber. The ABU44RZ adjustable post base is approved to be installed with the specified nails, Strong-Drive SD connector screws or specified machine bolts. The Strong-Tie ABU44RZ post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153.

Features:

The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
The 1 standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash

Installation:

Use all specified fasteners.
Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).
Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut

ABU

Place the standoff base and then the post in the ABU.
Fasten using nails or Strong-Drive SD structural connector screws or bolts (ABU88, ABU1010 – SDS optional).

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

Looking for something different? See the rest of our Simpson Adjustable Post Bases.

California Residents: WARNING

Notice - This connector is designed for Rough Cut lumber NOT nominal lumber (most common). This will only fit a post that measures an actual 4x4. If you have a nominal post measuring 3-1/2x3-1/2 you will need an ABU44Z Post base The Strong-Tie ABU series of adjustable post bases provide a 1 standoff for the post and are slotted for adjustability. The R series of post bases are designed exclusively for use with rough cut lumber. The ABU44RZ adjustable post base is approved to be installed with the specified nails, Strong-Drive SD connector screws or specified machine bolts. The Strong-Tie ABU44RZ post base features a G185 ZMAX galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners which meet the specifications of ASTM A153. Features: The slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier The 1 standoff helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash Installation: Use all specified fasteners. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut ABU Place the standoff base and then the post in the ABU. Fasten using nails or Strong-Drive SD structural connector screws or bolts (ABU88, ABU1010 – SDS optional). NOTE: The correct fasteners installed in the correct position must be used to achieve published load valuesLooking for something different? See the rest of our Simpson Adjustable Post Bases.California Residents: WARNING

The CPTZ concealed post base provides a clean, concealed look while providing a 1 in standoff height above concrete. The 1 in standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is part of a system of concealed connectors that includes the CBTZ and CJT.

Simpson Strong-Tie Concealed Post Base, 4 x 4

Post and column bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. Many models provide a 1 in. standoff from the concrete to help avoid post-end rot from moisture.

Simpson Strong-Tie ABU1212RZ Adjustable Post Base Rough

ABU Adjustable Post Base with Uplift

Post and Column Bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. And many models provide a 1 in. standoff from the concrete to help avoid post-end rot from moisture.