€ 55.50 · 4.9 (685) · Auf Lager
Power over Ethernet (PoE) Injector, 1 Port, 48 V DC, IEEE 802.3af Compliant
OverviewSpecificationsMore InformationDownloads
Reduce costs by using existing Cat5 cable to provide both power and data
The Power over Ethernet Injector from Intellinet Network Solutions allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.
Reduce Wiring Costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Preserve Existing Investments
Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.
Protect Your Equipment
Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).
Ideal when AC power is not available
Distance support: up to 100 m (328 ft.)
Power output of up to 15.4 Watts
Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
Full-power Class 3 PoE design
Fanless design ideal for silent operation
Fully NDAA-compliant
Three-Year Warranty
StandardsIEEE 802.3af (Power over Ethernet)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)General
Media support: - 100Base-TX Cat5 UTP/STP RJ45, 8 pin
Ports: - 1 RJ45 100 Mbps input port - 1 RJ45 100 Mbps data and power output ports - 1 power input connector (3 pin)
Protection functions: - Short-circuit protection for short GND - Overload protection for currents over 450 mA - High-voltage protection for output voltage exceeding 52 V
Compatibility - general: all IEEE 802.3af-compliant PoE devices
Supported INTELLINET NETWORK SOLUTIONS products: - Wireless 300N Access Points (524735, 524711) - High Power Wireless G Access Point (503082) - PoE Splitter (502900) - Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
Certifications: FCC Class B, Part 15, CE 89/336/EEC, UKCA, NDAARJ45 Input Connector Pinout
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: NC (not connected)
Pin 5: NC (not connected)
Pin 6: Tx- (data transmit)
Pin 7: NC (not connected)
Pin 8: NC (not connected)RJ45 Output Connector Pinout (Data + Power)
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: -Vdc_return (+) (feeding power [+])
Pin 5: -Vdc_return (+) (feeding power [+])
Pin 6: Tx- (data transmit)
Pin 7: -Vdc (feeding power [-])
Pin 8: -Vdc (feeding power [-])LEDs
AC Powered (red)
Channel Powered (green)
Channel Alarm (red)Power
Input: 100 – 240 V AC, 50 – 60 Hz
Output: 48 V DC / 350 mA
Power consumption: 19 Watts (maximum) Environmental
Plastic housing (ABS)
Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
Net weight: 120 g (0.26 lbs.)
Gross weight: 370 g (0.82 lbs.)
Operating temperature: 0 – 60°C (32 – 140°F)
Operating humidity: 10 – 90% RH, non-condensing
Storage temperature: -20 – 85°C (-4 – 185°F)Package Contents
Power Over Ethernet Injector
Power cable
Instruction sheet
Additional SKUs
ASIN: B001RAZKZC
EAN: 0766623524179
UPC: 766623524179
ALSO: 1602512
API: 77404
Physical Specifications
Product net weight: 0.12 kg
Product gross weight: 0.37 kg
Dimensions: 120 (L) x 50 (W) x 35 (H) mm
Packaging type: Retail Box
Packaging dimensions: 181 x 134 x 52 [mm]
Master Carton Quantity: 20
Master Carton Weight: 8.20 kg
Master Carton Dimensions: 380 x 280 x 287 [mm]
Datasheet
Datasheet » Download
Declaration of Conformity » Download
Manual
Quick Instruction Guide » Download
Quick Instruction Guide » Download
The Intellinet Network Solutions Power over Ethernet injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.
Intellinet 524179 1-Port PoE Injector
INTELLINET 524179 POWER OVER ETHERNET INJECTOR
Inject 80 Watts of Power Into Your Internet of Things (IoT) or PoE Network The Intellinet Network Solutions 2-Port Gigabit Ultra provides up to 50 W on the first port and up to 30 W on the second port to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts.
Intellinet 561495 Gigabit Ultra PoE Injector
Intellinet 508919 Industrial Gigabit PoE++ Injector
The PoE++ Injector TL-POE170S fully complies with IEEE 802.3af/at/bt standards with up to 60 W power supply. It can easily expand your network to where there are no power line or outlet, where you wish to fix devices such as PTZ IP Cameras, LED, etc. [Long Range Transmission] Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas. [Plug and Play Installation] Easy setup with no software installation or configuration needed.
TP-Link TL-PoE170S PoE++ Injector
Gigabit High-Power PoE+ Injector, 30W (561037) - Mercommbe
IC Intracom INTELLINET Power over Ethernet Injektor - 524179 for sale online
The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The PoE Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.
Intellinet 1-Port Gigabit High-Power PoE+ Injector
Intellinet Power over Ethernet (PoE) Injector (524179)